News

The difference between solid tires and tubeless is: 1. The inside of the solid tire is solid, mainly made of rubber, no cord as the skeleton, no ne...

Generally speaking, tires will also have a tire pressure marking, indicating the maximum tire pressure that the tire can accept. According to the p...

1. Pay more attention to the tire pressure With the arrival of summer, as the temperature rises, the number of puncture accidents increases. When d...

Pay more attention to the air pressure Check the tire pressure at any time, the tire pressure should be controlled at 2.3-2.5bar, if the air pressu...

Snow tires are tires suitable for use on snowy roads, rubber tires have metal spikes to increase grip, and people use these tires in winter in cold...

Tread: The part in contact with the road surface makes the car have the performance of driving and braking through friction, and should have good w...

Tire flat ratio The aspect ratio is the percentage of the tire's cross-sectional height to the maximum width of its cross-section. Tires with h...

First, tread failure Phenomenon 1: Unilateral wear, commonly known as eccentric wearCause: excessive camber or inversion of the wheel, which is oft...

1. Do the habit of checking the tire pressure at any time Air pressure is the key to extending the life of your tires – often exceeding 20% o...

1. Look at the pattern Generally, everyone starts to change tires when half of the pattern is eaten, and because the elasticity of the rubber begin...

There is a molded "△" sign on the shoulder of the tire along the round Friday, which is a tire wear warning signal sign. When the tire pa...

This is a common problem in the automotive sector. Traditional car tires do have inner and outer tubes. The inner tube is located on the inside of ...